用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。     

离子束合成钇硅化物的结构及红外谱特征

将稀土金属钇离子注入到n型单晶Si(111)中制备出钇硅化物埋层.利用x射线衍射、卢瑟福背散射和傅里叶红外吸收谱测量分析了样品的结构、原子的埋层分布和振动模式.结果表明，Y离子在注入过程中已与基底中的Si原子形成了YSi2结构相.真空下的红外光辐照处理促使YSi2择优取向生长，埋层中Si与Y的平均原子浓度比由24下降为20，与六方YSi2的化学计量比一致.还给出了钇硅化物的特征红外吸收谱.     

酸糖蛋白手性柱分离6种手性化合物

通过考察缓冲液种类、浓度及其pH值对对映体在手性柱上的保留和分离行为的影响,以及流动相中加入不同种类、不同浓度的不带电荷的有机溶剂乙腈、甲醇、正丙醇、异丙醇、流动相流速和柱温对对映体分离能力的影响,优化了含碳手性中心的碱性药物苯丙哌林、酸性化合物MT-A5及MT-酸和含硫手性中心的质子泵抑制剂奥美拉唑、泮托拉唑、雷贝拉唑对映体分离条件,最佳手性分离条件为:苯丙哌林,0.05 mol/L磷酸二氢铵缓冲液(pH 3.0)-乙腈(95∶5,V/V)为流动相,流速为0.7 mL/m in,柱温为20℃;MT-A5及MT-酸,流动相为0.01 mol/L醋酸铵缓冲液(pH 5.0)-乙腈(74∶26,V/V),流速为0.9 mL/m in,柱温为20℃;泮托拉唑,流动相为10 mmol/L醋酸铵缓冲液(pH 5.5)-乙腈(93∶7,V/V),流速为0.9 mL/m in;柱温为20℃;奥美拉唑和雷贝拉唑,流动相为0.01 mol/L醋酸铵缓冲液(pH 3.0)-乙腈(95∶5,V/V),流速为0.7 mL/m in,柱温为20℃。实现了应用高效液相色谱法在α1-酸糖蛋白手性柱上对上述化合物的对映体分离,并成功用于手性药物合成中的对映体过量百分率的测定。     

氟化类金刚石薄膜的拉曼和红外光谱结构研究

关键词：     

Simulation of Vacuum Microelectronic Triode Made of Single Carbon Nanotube

Vacuum microelectronic triode performance, based upon a unit cell with a nanotube field emitter, gate, and anode, was evaluated via computer simulation. Electron emission was calculated from the modified Fowler-Nordheim equation. The dependence of emitted current, upon geometrical factors, e.g., nanotube radius, nanotube height, and gate's hole radius, is shown. The device design parameters of trans-conductance, and cutoff frequency have been calculated, which show that this structure can be used as a microwave and millimeter wave amplifier. Electron current flux is shown for time-dependent 1–Thz sinusoidal variation frequency input.     

An inverse spectral problem for a nonsymmetric differential operator: Reconstruction of eigenvalue problem

In this paper, an algorithm is established to reconstruct an eigenvalue problem from the given data satisfying certain conditions. These conditions are proved to be not only necessary but also sufficient for the given data to coincide with the spectral characteristics corresponding to the reconstructed eigenvalue problem.     

First-principles study of indium on silicon (1 0 0)—the structure, defects and interdiffusion

The atomic structures of indium (In) on silicon (Si) (1 0 0)-(2 × 1) surface are investigated by the local density approximation using first-principles pseudopotentials. Total energy optimizations show that the energetically favored structure is the parallel ad-dimer model. The adsorption energy of In on ideal Si(1 0 0)-(1 × 1) surface is significantly higher than that on reconstructed Si(1 0 0)-(2 × 1) surface, suggesting that In adsorption does not break the Si-Si dimer bond of the substrate. When Si surface contains single dimer vacancy defects, In chain will be interrupted, leading to disconnected In nanowires. Displacive adsorption of In on Si(1 0 0) is also considered, and the calculation suggests that interdiffusion of In into Si substrate will not be favorable under equilibrium conditions.     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

光纤陀螺随机误差的滤波方案的探讨

范跃祖，宁文如，刘剑．光纤陀螺随机误差的滤波方案的探讨．数理统计与管理，１９９７，１６（４），２９～３２．光纤陀螺是新一代的光学陀螺仪，它的性能决定着惯性参照系统的精度。光纤陀螺的误差分为两大类。一类是有规律的，另一类是随机的。本文提出了两种新的用于光纤陀螺随机误差补偿的Ｋａｌｍａｎ滤波方案，考虑了两种随机模型：（Ⅰ）角速度变化为等随机的；（Ⅱ）角速度变化为等随机加速的。仿真结果表明，第二种方案对噪声起到了很好的抑制作用和滤波效果     

字节全加器及其在无线电测控系统中的应用

对全加器概念进行了推广，并在此基础上给出了使用字节全加器网络的无线电抗干扰算法。通过在实际的无线电测控系统中的应用，结果表明该算法具有良好的无线电抗干扰效果。